LC M-Series Flow meters
Truck Mounted Fuel Delivery Systems, Aviation Fueling
M Series - Liquid controls M-series rotary motion PD meters that facilitate measurement accuracy for the custody transfer of aviation fuels, industrial liquids, petroleum and LPG. These are available in different sizes M-5, M-7, M-10, M-15, M-25, M-30, M-40, M-60, M-80. It has the maximum capacity and viscosity of 800 GPM/3028 LPM (180 m³/h) capacity and 30-1,500,000 SSU, or 1cP to 325,000cP viscosity. The temperature ranges between -40°F to 160°F and maximum pressure is 150 PSI /10.3 Bar / 1034kPa.
Applications
CLASS 1
CLASS 2
CLASS 3
Refined Petroleum Products, Gasoline, Fuel Oils, Diesel Fuel, Kerosene, Ethylene Glycol, Propylene Glycol at rated capacity. Motor Oils, Crop Oils and Rotogravure Ink at reduced flow rates.
Aviation Fuels including Jet-A, Jet-A1, JP-8, Avgas fuels
Liquid Sweeteners and Syrups, Dextrose, Fructose, Sucrose, Maltose, Lactose. Corn Oil, Soy Bean, Cotton Seed and Coconut Oils, Shortenings
CLASS 4
Potted, treated, deionized, and demineralized Water, Windshield Washer Fluid and Solvents where no red metals are allowed
CLASS 8
CLASS 10
CLASS 14
Acidic pH Liquids, Nitric,
Phosphoric and Glacial
Acetic Acids, Fruit Juices
and Vinegar, Distilled Water
Liquified Petroleum Gas [LPG], Including: Butane, Isobutane, Pentane, Ethane, Freons, and Propane
Crude Oil, LACT, NOD, Heated and/or Viscous Liquids Including: Animal Fats, Resins, #6 Oil, Non-Abrasive Asphalt Emulsions
CLASS 16
General Solvent, Methanol,
Xylene, Naptha, Acetone,
MEK, MIBK, and Alcohols
(including 200 proof ethanol)
Specification
Sizes
Fitting Sizes
Nominal Flow Rate
Pressure
Inches
M-5®
M-7®
M-10®
M-15®
M-25®
M-30®
M-40®
M-60®
M-80®
1.5
2
2
3
3
4
4
4
6
GPM
LPM
M3/H
60
100
150
200
300
350
450
600
800
227
378
567
756
1134
1323
1701
2268
3024
14
23
34
45
68
79
101
135
180
PSI
BAR
kPa
150
150
150
150
150
150
150
150
150
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
1034
1034
1034
1034
1034
1034
1034
1034
1034
Options
Seals
End Fittings
Accessories
Buna
Viton
PTFE
NPT
BSPT
WELD
Registration (Electronic or Mechanical)
Temperature Compensation (TVC)
Strainers
Air Eliminators
Printers
Valves
Pulsers
Features
Low pressure drop.
Sustained accuracy
Wide temperature range
Wide viscosity range
Maximum adaptability